ELECTRIC PAPER AIRPLANE
Must see video tutorials
A
C
Use Phillips tip screwdriver to remove backing. Insert 3 x 1.5V AA / LR6 batteries (not included) as illustrated. Replace the battery backing and refasten screw
more than 20 seconds
B
Use standard copier paper - 8.5”X11” 20lb or A4 80 GSM
Nakamura Charger
Attach the cross bar and rotate until it is locked in place. Insert the power module clip onto the paper airplane nose
Power module
D
1. Cut elevator tabs and adjust using the Trim Card
E 1.Check for symmetry 2. Raise wings
How to trim
F
1. Insert charger rod into PowerUp port, propeller will start rotating
X 3. Push to stop
2. Push to charge