Decorating Services
Create the perfect tube with our advanced decoration capabilities and diverse size range. Our full-service team of experts includes a unique blend of creative and production specialists that can coordinate your packaging from concept to print.
Capabilities and Expertise
• Vertically integrated service supports harmonized timing with production scheduling
• Experts in packaging print technologies, including printing on more sustainable tubes
• Creative design services with skilled artists specially trained for production with your brand
• Ability to create new, on-brand designs for your packaging
• Decoration protected by varnish to maximize durability
Sustainable Solutions
RECYCLE-READY
RECYCLED CONTENT
LOWER-IMPACT PACKAGING* BIOMATERIAL
• Mono-material solutions designed for compatibility with recycling streams
• Sustainable materials available, including mechanical PCR and biobased options
*Lighter weight packaging solution when compared to similarly-sized bottles, and tubes can be further lightweighted with a low-profile closure
Vertical Integration Advantage
A single source for tubes, closures, and graphic design for a beautifully finished tube that is easy to buy
• A dedicated support team for product launch and high-quality ongoing service
• Fast development for increased speed to market
Specialty Heads, Caps, and Seals
We offer a wide variety of closures, including stock production, proprietary, and select vendor-supplied specialty caps.
We are also equipped to apply seals over the tube orifice on many head styles. These seals are perfect for e-commerce and have tabs, which allow for easy removal.
For tube length, place shoulder of tube at top of rule.
Measure the length as directed above. Compare with calibrated lengths and fluid ounce capacities on diagrammed tubes in this guide. Tube length is measured from shoulder to open end.
For tube diameter, place the folded or sealed end flat against diagram below.
Use the gauge to measure the diameter. Note the dimension and compare with range of diameter sizes shown in this guide.
Place one edge of tube seal on line below.
DIVINITY CAP DIVINITY CAP
2 3/16 "
DIAMETER 56mm 2"
DIAMETER 49mm
11/2 "
1 3/8 "
13/16 " DIAMETER
Blue tube diagrams denote they are available as a laminate or an extruded product.
Laminate tube lengths are available in 1 ⁄8 " increments only. For laminate, the shortest length is 2 3 ⁄4 " and longest is 8 1 ⁄2 " .
" DIAMETER 25mm
Suggested tube lengths do not take into account any amount trimmed off the tube during filling.
Measurements within this guide are for reference only. Actual tube sizing and fill weight determination is recommended.
Contact your sales representative for assistance.
Tube Quotation Form
Please complete and submit the following form. Make sure to provide all relevant information in order to receive an accurate quotation. Refer to this guide for descriptions, measurements, capacities, and other specifics for our standard size tubes, including detailed instructions for tube measuring.
Contact name Email
Company name
Address Phone Fax
Annual volume of tubes
Typical release size
Diameter of tube (please circle) 5/8″ 3/4″ 7/8″ 1″ 1-3/16″ 1-3/8″ 1-1/2″ 2″ 2-3/16″ 2-3/8″
Length of tube
Tube type Laminate
Extruded
Sleeve structure Monolayer Co-extrusion or barrier
Tube material
Low-density polyethylene
High-density polyethylene Polypropylene (extruded only)
Medium-density polyethylene EVOH (extruded only)
Sleeve color
PCR
Seal required Yes No
Head style Head color
Orifice size (or blind)
Cap style
Cap orientation Yes No
Cap finish
Decorating processes (please specify process and number of colors)
Extruded Laminate
Dry offset print (up to 8 colors) # of colors
Silk screen (up to 9 colors) # of colors
Foil # of colors
Cap color
Flexo (up to 12 colors) # of colors
Silk screen (up to 3 colors) # of colors
Foil (up to 2 foils) # of colors
Label Application Embossing/Debossing
Digimarc
Tactile print
360 ° Deco
Finish Gloss Matte Soft Touch