TURBO MAX HEAT TORCH KIT PRODUCT MANUAL PART NO. 411278
ADJUSTABLE FLAME CONTROL KNOB CONTINUOUS FLAME SWITCH SAFETY LOCK SWITCH
PIEZO IGNITION TRIGGER WITH ON/OFF CONTROL
CAUTION: For maximum protection, always wear safety goggles, gloves or other appropriate equipment
STAND / BASE
FEATURES
IMPORTANT
z Piezo ignition trigger with on/off control
with the appliance before filling it with gas. Keep these instructions for future reference. z ALWAYS USE YOUR TURBO MAX HEAT TORCH IN A WELL VENTILATED AREA. z This appliance shall only be used with disposable butane 45% / isobutane 28% / propane 26% only cartridges certified to EN417, UN2037. z IT MAY BE HAZARDOUS TO ATTEMPT TO FIT OTHER TYPES OF GAS CONTAINERS.
z Control knob for adjustable flame z Safety lock switch z Continuous flame switch z Includes stand/base z Use with Tradeflame Butane Gas Refill 70g
(10000602 / 326602) & 200g (10000603 / 326603)
CONTENTS
z Turbo Max Heat Torch z Butane Cartridge 70g (10000602 / 326602)
TO IGNITE / EXTINGUISH 1. Ensure the Safety Lock Switch is in the down position. 2. Press the Ignition Button to ignite the flowing gas. 3. To extinguish let go of the Ignition Button, if the Continuous Flame Switch has not been engaged. 4. If the Continuous Flame Switch has been engaged, depress the switch a second time to extinguish the flame. 5. Adjust flame to the desired level using the Flame Adjust Slide. ALLOW THE TORCH TO COOL.
z Read enclosed instructions carefully. Familiarise yourself
WARNING Please make sure the flame is off before refilling. Stop refilling once gas starts overflowing and wait 3 minutes before use.
z USE ONLY BUTANE FUEL. Use with Tradeflame
Do not open, break or drop the torch. KEEP THE UNIT OUT OF THE REACH OF CHILDREN. To avoid injury or damage, only ignite the torch when clear of your face, hands, clothing and any combustible materials. The burner/tip becomes extremely hot during and after operation, care must be taken to avoid accidental burns. Ensure flame is completely out after use. Do not expose to temperature above 50ºC / 120ºF. Contains flammable gas under pressure, do not disassemble, puncture, drop or incinerate after use. KEEP OUT OF REACH OF CHILDREN.
Butane Gas Refill 70g (10000602 / 326602) & 200g (10000603 / 326603).
DANGER
FOR USE WITH
z This product is supplied with gas.
It requires filling before use.
EXTREMELY FLAMMABLE GAS. CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF SAFETY INSTRUCTIONS HEATED. z Store the gas cartridge outdoors in a well ventilated area KEEP AWAY FROM HEAT/SPARKS/OPEN FLAMES/HOT out of the reach of children. Any indoor storage area shall SURFACES. NO SMOKING comply with AS/NZS 1569. LEAKING GAS FIRE: DO NOT EXTINGUISH, UNLESS LEAK z CARBON MONOXIDE HAZARD. USE ONLY IN WELL ACTIVATING A CONTINUOUS FLAME CAN BE STOPPED SAFELY. VENTILATED AREAS. 1. Once the trigger has been used to ignite the torch, depress z CARBON MONOXIDE HAZARD - THIS EQUIPMENT ELIMINATE ALL IGNITION SOURCES IF SAFE TO DO SO. the Continuous Flame Switch to activate the continuous PROTECT FROM SUNLIGHT. CAN PRODUCE CARBON MONOXIDE WHICH HAS NO on function. STORE IN A WELL-VENTILATED PLACE. ODOUR. USING IT IN AN ENCLOSED SPACE SUCH AS 2. To disengage the continuous flame, depress the switch FOLLOW INSTRUCTIONS SUPPLIED WITH APPLIANCES. CAR, MOBILE HOME MAY CAUSE DEATH. a second time to extinguish the flame. REFER TO THE SDS FOR FIRST AID MEASURES, FIRE z For maximum protection always wear safety goggles, FIGHTING MEASURES, ACCIDENTAL RELEASE MEASURES gloves and other appropriate safety equipment. AND HANDLING AND STORAGE.
MAINTENANCE
z If symptoms such as flaring burner, issues with
lighting, leaks from seals or problems with gas control are identified, do not attempt to repair, return to your authorised stockist for service and maintenance. z This appliance must only be serviced by an authorised person.
ALWAYS USE YOUR HANDYMAN SOLDERING TORCH IN A WELL VENTILATED AREA
DANGER: ONCE FILLED WITH BUTANE, CONTENTS EXTREMELY FLAMMABLE AND UNDER PRESSURE. KEEP OUT OF REACH OF CHILDREN.
tradeflame
tradeflametools