TURBO BLOW TORCH KIT PRODUCT MANUAL PART NO. 411067
CYCLONE BURNER
LOCK COLLAR
CAUTION: For maximum protection, always wear safety goggles, gloves or other appropriate equipment
ADJUSTABLE FLAME CONTROL KNOB ERGONOMIC COMFORT GRIP HANDLE
PIEZO IGNITION
TRIGGER LOCK BOM FITTING
IMPORTANT: READ THESE INSTRUCTIONS FOR USE CAREFULLY. FAMILIARISE YOURSELF WITH THE APPLIANCE BEFORE CONNECTING IT TO ITS GAS CONTAINER. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
FEATURES
z G as: Suitable for use with Propane, TF/ULTRA GAS
®
TO IGNITE
and ULTRA 30 ™
(sold separately) z Flame type: Cyclone: Rotating flames wrap around pipes giving an even heat output for faster heating, soldering and brazing ® z Fuel cartridge: 400g TF/ULTRA GAS z Precise control: Variable flame control puts the perfect heat at your fingertips z Effortless ignition: Ditch the matches! A simple trigger click sparks the flame instantly z Continuous heat: Slide the trigger lock for hands-free torching
1. To avoid injury or damage, always point the burner away from your body and any flammable or combustible materials. 2. Turn the flame control knob (+) anti-clockwise.
ADJUSTING THE FLAME LEVEL 1. Turn the flame control knob anti-clockwise (+) to increase the flame. 2. Turn the flame control knob clockwise (-) to decrease the flame.
TO EXTINGUISH
Turn the flame control knob fully clockwise to the closed position.
TO ASSEMBLE 1. Check that seals between the appliance and the gas container are in place and in good condition before connecting the gas cartridge. Do not use this appliance if it has damaged or worn seals. 2. Ensure the flame control knob is turned off (-) fully clockwise. 3. Keep the cartridge in an upright position and place the valve body on top of the BOM fitting. 4. Gently screw (clockwise) the valve body into the cartridge. CAUTION - DO NOT OVER TIGHTEN.
BEFORE IGNITION • Spray Gas Leak Detection Spray (211634) or Gas Leak Detection Foam (400023)
around seal and check for bubbles. DO NOT USE IF YOU SMELL GAS OR SEE BUBBLES. • If you smell gas or see bubbles, the torch is not correctly attached to the gas cartridge. DO NOT IGNITE. Remove the blow torch from the gas cartridge and re-attempt connection. • Appliance must be repaired by a qualified technician. • NEVER USE A FLAME TO CHECK FOR LEAKS. • Make sure to test in a well-ventilated and spark-free area and where there are no open flames.
tradeflame
STORAGE
z Always detach torch from cylinder when not in use. z Make sure that the cylinder is disconnected and is stored in a well ventilated area,
out of the reach of children, free from direct sunlight, heat and ignition sources. If being stored indoors, ensure that the location complies with the standard AS/NZS 1596. z Do not store chemicals or flammable materials, or spray aerosols near this appliance.
MAINTENANCE / SERVICING If symptoms such as flaring burner, issues with lighting, leaks from seals or problems with gas control are identified, do not attempt to repair, return to your authorised stockist for service and maintenance. This appliance must only be serviced by an authorised person.
3 YEAR LIMITED WARRANTY Details available at tradeflame.com
tradeflametools