The ACURA Group Vibratrol D-Series Tech Data Sheet.
OVERVIEW Spring Hanger Boxes are used for support of equipment and pipework to effectively isolate vibration. Spring hangers provide good vibration isolation where there is very little high frequency noise. D-Series spring hangers should be utilised to minimize damaging vibration from suspended low frequency equipment (above 1200 RPM). They are used in many applications including fan coil units, attenuators, ducting, exhaust, package units, piping etc. To be used in-line with threaded rod for single and trapeze type systems.
FEATURES • Heavy duty box design • Large diameter spring for additional stability • Wide hole opening for angular requirements • Colour coded springs for load identification • Loads of up to 175kg
INSTALLATION Piping or equipment should be hung at its proper elevation by using temporary fixtures that can be removed after hangers are installed and adjusted. For best results, hangers should be at or near the ceiling. When used for pipe support with little or no longitudinal expansion, cages may be hard bolted to the support point. Ensure the structural support point is vertically above the centre of the pipe or equipment support point. To load the spring, turn the upper nut on the lower rod clockwise.
PART N°
DESCRIPTION
RATED WEIGHT
MAX WEIGHT
STATIC DEFLECTION
SPRING CONSTANT
35D30SH-KIT
35D30 (Silver)
15 - 30 kg
451 N
24.75 mm
11.2 N/mm
35D45SH-KIT
35D45 (Gold)
20 - 45 kg
774 N
27.5 mm
18.2
35D70SH-KIT
35D70(Black)
35 - 70 kg
1228 N
30.8 mm
29.8
35D100SH-KIT
35D100 (Black)
50 - 100 kg
1707 N
34.65 mm
48.3
35D125SH-KIT
35D125 (Green/Silver)
70-125 kg
1225 N
35 mm
48
35KDBS
50 KG Booster for D Springs
50 kg
741 N
24 mm
17.65
35SHB-HDG
Hanger Box Assembly
150
2448 N
-
-
1300 750 750 | www.acuragroup.com.au | sales@acuragroup.com.au S.A. Head Office: 10 Selgar Avenue, Tonsley, S.A. 5042 | W.A. Branch Office: 4 Railway Parade, Bayswater, W.A. 6053
1