The ACURA Group Braced Cantilever Bracket Tech Data Sheet.
OVERVIEW
BRACED CANTILEVER BRACKET
Used for the installation of building services for supporting anything from pipe work, duct work, equipment, and cable tray. 70mm
This model is braced with a longer base plate for greater strength than the unbraced option.
KEY SYSTEM ADVANTAGES 220mm
• •
40mm
•
40mm
• • • TECHNICAL DATA
•
MATERIAL
MATERIAL TYPE
FINISH
Mild Steel
225 Mpa
HDG or Plain
Adjustable & Modular Design: Allows easy on-site configuration and alignment without welding, ideal for modular construction. Versatile Application: Compatible with multiple brackets, fittings, and service supports for various orientations and load conditions. Corrosion Resistant: Available in hot-dip galvanized or stainless-steel finish for enhanced durability in harsh environments. Lightweight & Strong: High load capacity with reduced structural weight, ensuring easier handling and transport. Low Maintenance: Components can be replaced or adjusted easily without specialized tools. Cost-Effective Solution: Minimises fabrication and rework, providing an efficient alternative to rigid welded systems. Independent tested and verified by third-party organisations.
laycomm Point Load
Free End Fixed End
SECTION PROPERTIES
Uniform Distributed Load (UDL)
Free End
Fixed End
X-X AXIS
Y-Y AXIS
WEIGHT
AREA OF SECTION (A)
MOMENT OF INERTIA (I)
SECTION MODULUS (Z)
MOMENT OF INERTIA (I)
SECTION MODULUS (Z)
Kg/m
mm2
I 10^6 mm4
Z 10^3 mm3
I 10^6 mm4
Z 10^3 mm3
2.6
332
0.071
3.090
0.092
4.431
QUICK N°
PART N°
LENGTH (mm)
LOAD RATING (Kn)
FINISH OPTIONS
QTY
A0818
19ECB300
320
4.35
HDG / PC / SS
1
A0819
19ECB450
470
3.05
HDG / PC / SS
1
A0820
19ECB600
635
3.20
HDG / PC / SS
1
A0821
19ECB750
780
2.75
HDG / PC / SS
1
A0822
19ECB900
900
1.5
HDG / PC / SS
1
Safety Factor of 1.5 has been applied. Note: The allowable point load is determined at the end of the Cantilever Bracket. Actual load capacity may vary depending on the post position, support conditions, and application. For project-specific verification or engineering guidance, please contact Acura Group. All load data is applied with appropriate safety factors and verified in accordance with relevant AS/NZS engineering standards. The M12 concrete anchor to be selected to satisfy the Cantilever Bracket allowable loading.
1300 750 750 | www.acuragroup.com.au | sales@acuragroup.com.au
1