CP Road MAP Brief March 2019
References [1] J.R. Roesler, A. Bordelon, A.S. Brand, A.N. Amirkhanian, Fiber Reinforced Concrete for Pavement Overlays: Technical Overview, 2018. [2] ACI Committee 544, Report on Fiber Reinforced Concrete, ACI 544.1R-96 (Reapproved 2009), American Concrete Institute, Farmington Hills, MI, 2009. [3] R.S. Rollings, Field Performance of Fiber-Reinforced Concrete Airfield Pavements, Report DOT/FAA/PM-86/26, U.S. Army Engineer Waterways Experiment Station, Vicksburg, MS, 1986. [4] D. King, J.R. Roesler, Structural Performance of UltraThin Whitetopping on Illinois Roadways and Parking Lots, Research Report No. FHWA-ICT-14-018, Urbana, Illinois, 2014. [5] J.R. Roesler, D.A. Lange, S.A. Altoubat, K.-A. Rieder, G.R. Ulreich, Fracture of plain and fiber-reinforced concrete slabs under monotonic loading, J. Mater. Civ. Eng. 16 (2004) 452–460. doi:10.1061/(ASCE)08991561(2004)16:5(452). [6] D. Beckett, Comparative tests on plain, fabric reinforced and steel-fibre reinforced concrete ground slabs, Concrete. 24 (1990) 43–45. [7] M. Barman, B. Hansen, Comparison of Performances of Structural Fibers and Development of a Specification for Using Them in Thin Concrete Overlays, Report No.
8
MN/RC 2018-29, Minnesota Department of Transportation, 2018. http://www.dot.state.mn.us/research/reports/2018/201829.pdf. [8] Z. Li, N. Dufalla, F. Mu, J.M. Vandenbossche, Bonded concrete overlay of asphalt pavements mechanistic-empirical design guide (BCOA-ME): Theory manual, University of Pittsburgh, Pittsburgh, Pennsylvania, 2016. [9] J.P. Covarrubias, J. Roesler, J.P. Covarrubias, Design of concrete slabs with optimized geometry, in: 11th Int. Symp. Concr. Roads, 2010: p. Seville, Spain. [10] A. Bordelon, J. Roesler, Design with Fiber-Reinforcement for Thin Concrete Overlays Bonded to Asphalt, J. Transp. Eng. 138 (2012) 430–435. doi:10.1061/(ASCE) TE.1943-5436.0000339. [11] M. Barman, J.M. Vandenbossche, Z. Li, Characterization of Load Transfer Behavior for Bonded Concrete Overlays on Asphalt, Transp. Res. Rec. 2524 (2015) 143–151. doi:10.3141/2524-14. [12] ACI Committee 544, 544.4R-18: Guide to Design with Fiber-Reinforced Concrete, 2018. [13] D. Harrington, G. Fick, Guide to Concrete Overlays: Sustainable Solutions for Resurfacing and Rehabilitating Existing Pavements, 3rd ed., National Concrete Pavement Technology Center, Ames, Iowa, 2014. [14] ACI Committee 544, Guide for Specifying, Proportioning, and Production of Fiber-Reinforced Concrete, ACI 544.3R-08, American Concrete Institute, Farmington Hills, MI, 2008.
Neither CP Road Map participants or sponsors nor the Federal Highway Administration assumes liability for the information contained in this publication or endorses products or manufacturers mentioned herein.
