PRODUCTS
SNOW & ICE REMOVAL Fisher Engineering Trailcommander 250 & 600 Stainless Steel Drop Spreaders Fisher Engineer Trailcommander 250 & 600 stainless steel drop spreaders provide up to 36 in. of spread width to in a drop pattern so slate stays exactly where your vehicle drives. Ideal for treating sidewalks, walking paths and over paved surfaces where truck equipment can’t access.
• Designed with three mounting systems to fit on most UTVs, compact tractors, or wheel loaders. Provides spread widths of 30, 33 or 36 inches with easy to activate baffles • Variable-speed control allows you to precisely match material delivery rate to the conditions • Free-flowing material delivery system ensures a consistent amount of material flows into the spreader trough www.greenindustrypros.com/21627542
VSI Genesis Brine Buddy VSI’s Genesis Brine Buddy is designed for those looking to begin their journey with liquid de-icing.
• Stainless and poly design • Baggs or bulk salt can be used with this machine • Makes up to 1,000 gallons per hour • Runs off 110-volt power in a standard 20 amp outlet • Truck fill feature • Full manifold system for additive injection www.greenindustrypros.com/21660024
Hilltip IceStriker 6000CM Combi Spreader Hilltip’s IceStriker 6000CM model Combi Spreader is the largest Hilltip model available in the North American market. Like it’s smaller cousins, the 6.0 cu. yd. unit is designed for ½ ton trunks and larger and has the ability to spread granular salt, sand, gravel and also serve as a liquid deicing sprayer.
• 12- or 24V dual motors • 12-in. pintle chain-driven unit • Holds up to 220 gal. in liquid tanks integrated into sides of poly hopper. Optional bladder tank increases the unit’s overall brine capacity to 550 gal. • Optional 40-ft. hose reel and hand-held spray nozzle for spraying hard-to-reach areas • Optional 6 ft., 7-in. dual spray bar with 16 ft. spraying width • All functions controlled via StrikeSmart controller • Adjustable spreading symmetry function to adjust direction of material off spinner from cab-mounted controller • HTrack tracking software option is standard for remote tracking and management. • Accessory options include an LED work light, strobe lights, illuminated license plate kit, rear and indicator lights, leg stand for more convenient storage/installation, end material alarm sensor on the spinner, tarp cover and an extended auger for axle loading optimization • Available in orange and the standard gray color www.greenindustrypros.com/21627545
Meyer Super-V3 Meyer’s Super-V3 plows are engineered for 3/4-ton and larger pickups, or choose the Super-V3LD for 1/2-ton pickups. Their independently controlled tapered wings give you the flexibility to go from V, scoop, or straight-blade configuration with the press of a single button.
• Nite Saber LED lights for better night vision • Locking double-acting cylinders to back-drag snow more efficiently • Bottom-trip design so only the lower portion of the blade gives way to minimize snow loss • Upper-sealed center deflector to keep snow off the windshield • Lower-sealed center cutting edge to eliminate snow trails • 5-year warranty www.greenindustrypros.com/21109247
18
SNOW PRO | SEPTEMBER/OCTOBER 2021
