new
PRODUCTS
JLG AE1932 AllElectric Davinci Series Scissor Lift The AE1932 from JLG is an all-electric scissor lift in the Davinci Series with with zero emissions, resulting in clean, quiet operation. Features include: • Powered by lithium-ion battery • 19-foot platform height and 32 inches wide • Platform capacity of 600 pounds, both indoors and outdoors • Compliant to A92.20 standards • Travels two times faster than a standard scissor lift
Makita GCU04Z Chainsaw
• Each wheel is controlled independently for reduced tire wear and limits damage to sensitive flooring
Makita’s 40V max XGT Brushless 18-inch Chainsaw (GCU04Z) for landscaping, land clearing, forestry and trimming applications features zero emissions, low noise and less maintenance. The chainsaw is powered by one 40V XGT 5.0-Ah battery and features a Makita-built brushless motor. This tool is equivalent to a 42-cc gas chainsaw. The GCU04Z has an 18-inch guide bar and Makita-built motor with a variable-speed trigger that delivers 0 to 5,020 fpm for powerful cutting speed. It has zero emissions and reduced maintenance: There’s no engine oil to change, no spark plug to replace and no air filter or muffler to clean. And, there’s no need to drain the fuel for storage.
• Conducts self-diagnostics and allows systems tests from mobile phones • Comes standard with QuikFold rails and JLG Mobile Control
https://rnt.news/jbu1yn
Stellar NXT52 Hooklift Stellar’s NXT52 Hooklift, a 52,000-pound capacity hoist, is a lightweight unit capable of loading, unloading and dumping various truck bodies. The hooklift features a Z-channel base design and universal body latching system. This system has outside locks that can be moved by loosening the clamp bolts, repositioning and bolting back down. This feature allows the operator to position the body locks in specific locations to accommodate body locks that may not be in the correct spot. The versatility of this system eliminates the need to cut locks off, reweld or repaint.
https://rnt.news/me3k5d
https://rnt.news/6k3069
Atlas Copco B-Air 185-12 Portable Screw Air Compressor The B-Air 185-12 by Atlas Copco features five to 12 bars of pressure, a stable flow rate of 5.4 to 3.7 m3/min and 55-kWh battery storage capacity. It’s independent of the need for fuel or a local power source to plug into and has the capability to perform for up to a full typical work shift. In turn, it provides portability for those working on sites where regular access to electricity is not practical. It only needs to be serviced every 2,000 hours.
https://rnt.news/haubx0
28 JUNE/JULY 2023
www.ForConstructionPros.com/RENTAL
