PRESERVATION PRODUCTS Sponsored By
PRESERVATION EQUIPMENT
SealMaster SP Squeegee Machine The workhorse of squeegee machines with a 320 gal. capacity designed to mix and apply pavement sealers with or without sand. • Round tank design with true full-sweep agitation and rubber wiper blades • Quick-change floating squeegee assembly with rear-angling squeegee (windrow feature) and front box squeegee • Rear wheel drive for added traction and easier trailer loading • Power steering for ease of maneuvering • Easy to open, butterfly sealer discharge valves ForConstructionPros. com/10082640
BOMAG RS 500 Recycler/Stablizer The 55,556-lb. RS 500 Recycler/ Stablizer features a 510-hp Mercedes Benz OM 471 LA engine and an offsetting rotor design with the capability of side-shifting to either side of the machine. • 88.5 in. rotor width, 197 in. maximum cutting depth and a recycling speed of up to 164 fpm • FLEXMIX technology includes three infinitely variable gradation bars that can be adjusted to achieve target material size settings • Standard quick-change BRS05 tooth holder for fast tooth replacement • ROPS/FOPS operator’s cab offers comfortable, climate-controlled operation and is centrally positioned for all-around visibility ForConstructionPros. com/12293017
66
ASPHALT CONTRACTOR AUGUST 2021
ACON0821_66-68_PreservationEquip_JD.indd 66
Wirtgen WR 240i Recycler/Stabilizer The WR 240i stabilizes large areas of incohesive soils utilizing any stabilizing medium, and recycles 100% of existing asphalt pavements in situ. • Working width of 7 ft. 10 in. and maximum working depth of 20 in. • 600 hp Cummins six-cylinder Tier 4 Interim engine • Nine rotor speeds aided by computer-controlled metering technology with automatic monitoring • All-wheel steering and a separate steering angle on the rear axle for a tight turning radius
S co •
• • • • •
•
ForConstructionPros.com/10942294
F c
Rayner PavementSaver III
Roadtec CIR Additive System
The new features of the PavementSaver III include a Control Area Network and an Autonomous Rate Control System. • Control Area Network (CAN) components make up the majority of the PavementSaver III’s control system, which benefits everyone – the owner, operator and mechanic. Features of the network include reduced wiring, IP67 environmentally-sealed components for greater durability and fast/easy system analysis. The control system constantly checks every switch, every coil, every indicator light for connectivity and functionality and alerts the operator as soon as any issues are detected
The Roadtec CIR Additive System is used in the cold-in-place recycling of asphalt pavement in the repair and rehabilitation of asphalt-paved roads. • The system is used to transfer, measure and inject either emulsion or foamed asphalt to the cutter housing of the milling machine • The additive is then thoroughly blended with the milled material and transferred for paving • Mounted to the rear of the milling machine, the CIR Additive System is the same width as the mainframe of the milling machine ForConstructionPros. com/20866975
A
K co as • •
F c
ForConstructionPros. com/12301959
C
TI an co pa •
Renova 4000 Asphalt Recycler The RENOVA 4000 is a self-contained, easy to operate, mobile machine that produces hot mix asphalt on site from reclaimed asphalt pavement extracted directly from the repair area or from stockpiled millings, RAP or excess asphalt. • Appropriate for patching potholes and utility cuts and for making other small asphalt repairs year round regardless of the outside temperature • Produces up to 2 tons of recycled hot mix asphalt per cycle in 12 to 15 minutes ForConstructionPros.com/12303127
www.ForConstructionPros.com/Asphalt
7/20/21 5:15 PM
• • •
•
•
F c
