l-
PRESERVATION PRODUCTS MILLING MACHINES
Sponsored By
Trimble PCS900 Paving Control System for Milling Machines Version 2.1 of the PCS900 3D paving control system for milling machines helps contractors mill a smoother and higher quality surface, reduce machine stoppage and minimize rework. • Hot swap functionality in the SPS930 universal total station maintains continuity and accuracy of milling operations without stopping the machine • Can be used on multiple machines and jobsites • Communicates directly with factory-installed 2D systems from most milling machine manufacturers ForConstructionPros.com/10083522
Roadtec RX-600e/ ex Cold Planer
Dynapac PL2000 Cold Planer The Dynapac PL2000 hydraulically powered, high-capacity cold planer features four-track steering, a front loading system and a mechanical beltdriven cutting drum. • For removing both asphalt and concrete pavements • Working width of 79 in. and a 13 in. cutting depth • Operated by two joysticks (driving and conveyor belt functions) • Automated sequential processes for conveyor belts and water spraying system • 600 hp Cummins QSX 15 diesel engine • 977 gal. water tank ForConstructionPros. com/10078174
The RX-600e cold planer was recently enhanced with Auto Cut™ technology. Auto Cut enables the RX-600 to pause, travel over an obstruction and continue at the same cut depth accurately and repeatedly. • Gives operators ability to easily manage manhole covers, railroad tracks and crosswalks
ForConstructionPros. com/11324237
• Able to travel over an obstacle, and resume accurate cut depth without reprogramming or delay • Maintains precise level orientation when encountering impediments • Works in union with ACE grade and slope sensor system ForConstructionPros. com/10913551
Caterpillar K System Milling Drum After four years of research, Caterpillar Inc. has unveiled the K System standard milling drums with advanced features for surface removal or complete removal of road surfaces. • Dual retention system feature with taper and cylinderical lock. No need for torqueing bolts • Highly featured tool holder with anti-rotating design to ensure proper holder positioning • System designed as left or right sided pieces to allow for optimized cutting effort and material flow delivering an excellent cutting pattern • Available in multiple space sizing with the same holder system ForConstructionPros.com/21047786
www.ForConstructionPros.com/Asphalt
ACON0821_62-65_PreservationMilling_JD.indd 63
Wirtgen W 200 Hi The W 200 Hi cold milling machine offers a hydraulically driven milling drum assembly that can be displaced 15.75 in. to the right or the left, providing maximum flexibility for operating in tight quarters. • Milling drum assembly can be moved while in operation and provides a zero edge on both sides for work right up to and flush with curbs or concrete barriers • Edge protector can be raised by 16.5 in. on both sides so the machine can work flush with the edge, even when cutting deep • Powered by a 580 hp Tier 4i engine • Includes the Level Pro automatic level control, Parallel-to-Surface (PTS) system and the Intelligent Speed Control (ISC) system
BOMAG BM1200/35 Cold Mill The BM1200/35 cold milling machine offers a 47.2 in. cutting width and 13 in. maximum cutting depth and features a rear rotor design that optimizes milling performance. • Cutter design with the BMS 15 interchangeable holder system incorporates a single bolt for holder retention and requires a low tightening torque of 75 ft. lbs. • 349 hp MTU Tier 4 Final diesel engine offers power to efficiently mill asphalt at speeds reaching 105 fpm • 85, 95 and 107 rpm milling drum speeds • 25.6 in. wide inside and 23.6 in. wide outside conveyors with capacities reaching 6,357 ft. per hour • 224.4 in. maximum conveyor discharge height ForConstructionPros. com/12095029
AUGUST 2021 ASPHALT CONTRACTOR
63 7/20/21 5:05 PM
